克拉苏构造带盐下超深层储层的构造改造作用与油气勘探新发现

塔里木盆地克拉苏构造带油气群下白垩统巴什基奇克组埋深超过6 000 m,储层基质渗透率低,裂缝普遍发育,构造对储层的改造作用明显,但博孜9井的勘探突破反映出不同区带间构造改造作用差异较大、非均质性极强,重新认识构造对储层的改造作用对于预测超深层储层、指导油气勘探生产具有重要的意义。为此,基于钻井取心、构造平衡恢复、裂缝充填物同位素测年、区块应力数值模拟等资料,结合流体包裹体、声发射古应力、铸体薄片等实验分析方法,从定性分析到定量计算、研究了克拉苏构造带油气群超深层储层的构造改造作用及其差异性。研究结果表明:①北部天山造山带及南部古隆起控制了该构造带储层的沉积格局及差异构造变形,形成巴什基奇克组储层"西薄东厚"的分布特征;②博孜区段古应力最小,构造变形主要为正向挤压、逆冲传播,局部井区为斜向压扭;③大北区段主要为斜向压扭,古应力较小,构造变形为逆冲叠置;克深区段古应力最大,构造变形主要为正向挤压、后缘逆冲抬升、前缘滑脱收缩;④差异构造变形使同一构造带不同构造变形样式的构造减孔量呈现出较大的差别,且控制了不同区段造缝期与成岩胶结的叠加影响、中晚期裂缝网络与油气成藏期的配置关系,加剧了储层的非均质性,是区段间产能差异的基础改造因素;⑤现今构造应力的大小及方向影响裂缝有效性,南部为强挤压应力区,背斜相对高部位裂缝走向与现今应力交角较小,裂缝有效性最好;⑥构造成岩环境决定了构造裂缝充填物的类型,北部区块以淡水—半碱水介质成岩环境为主,裂缝充填物类型为方解石,有利于对储层进行酸化压裂改造。     

RESERVOIR PROPERTIES OF BARREMIAN – APTIAN URGONIAN LIMESTONES,SE FRANCE,PART 1: INFLUENCE OF STRUCTURAL HISTORY ON POROSITY-PERMEABILITY VARIATIONS

Upper Barremian – Lower Aptian inner platform “Urgonian” limestones in the Mont de Vaucluse region, SE France, consist of alternating metre-scale microporous and tight intervals. This paper focuses on the influence of structural deformation on the reservoir properties of the Urgonian limestone succession in a study area near the town of Rustrel. Petrographic, petrophysical and structural data were recovered from five fully-cored boreholes, from the walls of a 100 m long underground tunnel, and from a 50 m long transect at a nearby outcrop. The data allowed reservoir property variations in the Urgonian limestones to be studied from core to reservoir scale. Eleven Reservoir Rock Types (RRTs) were identified based on petrographic features (texture, grain size), reservoir properties (porosity, permeability), and the frequency of structural discontinuities such as fractures, faults and stylolites. Tight and microporous reservoir rock types were distinguished. Tight reservoir rock types were characterised by early cementation of intergranular pore spaces and by the presence of frequent structural discontinuities. By contrast microporous reservoir rock types contained preserved intragranular microporosity and matrix permeability, but had very few structural discontinuities. Observed vertical alternations of microporous and tight rock types are interpreted to have been controlled by the early diagenesis of the Urgonian carbonates. Deformation associated with regional-scale tectonic phases, including Albian – Cenomanian “Durancian” uplift (∼105 to 96 Ma) and Pyrenean compression (∼55 to 25 Ma), resulted in the modification of the initial petrophysical properties of the Urgonian limestones. An early diagenetic imprint conditioned both the intensity of structural deformations and the associated circulations of diagenetic and meteoric fluids. Evolution of the Reservoir Rock Types is therefore linked both to the depositional conditions and to subsequent phases of structural deformation.     

Towards a Better Prediction of Cell Settling on Nanostructure Arrays—Simple Means to Complicated Ends

Vertical arrays of nanostructures (NSs) are emerging as promising platforms for probing and manipulating live mammalian cells. The broad range of applications requires different types of interfaces, but cell settling on NS arrays is not yet fully controlled and understood. Cells are both seen to deform completely into NS arrays and to stay suspended like tiny fakirs, which have hitherto been explained with differences in NS spacing or density. Here, a better understanding of this phenomenon is provided by using a model that takes into account the extreme membrane deformation needed for a cell to settle into a NS array. It is shown that, in addition to the NS density, cell settling depends strongly on the dimensions of the single NS, and that the settling can be predicted for a given NS array geometry. The predictive power of the model is confirmed by experiments and good agreement with cases from the literature. Furthermore, the influence of cell‐related parameters is evaluated theoretically and a generic method of tuning cell settling through surface coating is demonstrated experimentally. These findings allow a more rational design of NS arrays for the numerous exciting biological applications where the mode of cell settling is crucial.     

A study on the monitoring model development for quality measurement of internet traffic

The recent trend of integration among new network services such as the long-term evolution (LTE) based on internet protocol (IP) needs reputable analyses and prediction information on the internet traffic. The IP along with increased internet traffics due to expanding new service platforms such as smartphones will reflect policies such as network QoS according to new services. The establishment of monitoring methods and analysis plans is thus required for the development of internet traffics that will analyze their status and predict their future. The paper with the speed of Internet traffic model is developed for monitoring the state of the experiment and verified. The problem is that the proposed service Internet service provider (ISP) to resolve the conflict between the occurrences can be considerably Internet traffic and that the state of data may be helpful in understanding. The paper advancement policy to reflect the network traffic volume of Internet services and users irradiation with increased traffic due to the development and management of the analysis was carried out experimental measurements.     

Spectral Animation Compression

This paper presents a spectral approach to compress dynamic animation consisting of a sequence of homeomor-phic manifold meshes. Our new approach directly compresses the field of deformation gradient d...     

Nonlinear response in glass fibre non-crimp fabric reinforced vinylester composites

This paper addresses the nonlinear stress-strain response in glass fibre non-crimp fabric reinforced vinylester composite laminates subjected to in-plane tensile loading. The nonlinearity is shown to be a combination of brittle and plastic failure. It is argued that the shift from plastic to brittle behaviour in the vinylester is caused by the state of stress triaxiality caused by the interaction between fibre and vinylester. A model combining damage and plasticity is calibrated and evaluated using data from extensive experimental testing. The onset of damage is predicted using the Puck failure criterion, and the evolution of damage is calibrated from the observed softening in plies loaded in transverse tension. Shear loading beyond linear elastic response is observed to result in irreversible strains. A yield criterion is implemented for shear deformation. A strain hardening law is fitted to the stress-strain response observed in shear loaded plies. Experimental results from a selection of laminates with different layups are used to verify the numerical models. A complete set of model parameters for predicting elastic behaviour, strength and post failure softening is presented for glass fibre non-crimped fabric reinforced vinylester. The predicted behaviour from using these model parameters are shown to be in good agreement with experimental results.     

Work-hardening and plastic deformation behavior of Ti-based bulk metallic glass composites with bimodal sized B2 particles

In this work, the role of individual B2 particles with bimodal length scale on work-hardening and plastic deformation behaviors of Ti-based bulk metallic glass composites has been studied by systemic microstructural and mechanical investigations. At the early stage of plastic deformation, work-hardening characteristic was clearly observed. This work-hardening behavior can be supported by the martensitic transformation and the deformation induced twinning in both small- and large-sized B2 particles during deformation. On progress of plastic deformation after work-hardening, small-sized B2 particles (1–10 μm) were penetrated by propagation of main shear bands while large-sized B2 particles (100–200 μm) were severely interacted with shear bands leading to formation of multiple shear bands and impeding the propagation of principal shear bands. This reveals that each B2 particle with different length scale plays a distinct role on the stage of plastic deformation depending on the particle size.